850 Krokodíl – 16bit General Project

Project version 7.1.1
850 Krokodíl – 16bit General Project
16bit

Sound sample

Project Information

  • General sound project suitable for custom modifications, especially individual light settings.
  • Designed for 16-bit ZIMO MS sound decoders.
  • Recommended minimum decoder software version is 5.5.
  • The factory default address is 3.
  • Program CV8 = 8 to reset the decoder to the project defaults.

Function Assignment

Function mapping and CV settings can be modified.

  • F0 White marker lights
    Affected function output: FA0v, FA0r
    Direction dependent
  • F1 Spare for lights
  • F2 Spare for lights
  • F3 Shunting mode
    • speed range reduced to ½
    • reduces acceleration / braking times to ¼ of CV3 and CV4
    • triggers a short horn at start
  • F4 Short horn
  • F5 Coasting
    Idle sound regardless of set speed
  • F6 Engine to maximum RPM
    Independent of set speed, even when stationary
  • F7 Long horn
  • F8 Sound on/off
    Engine on/off
  • F9 Spare for lights
  • F10 Unused
  • F11 Unused
  • F12 Screw coupler down
  • F13 Screw coupler up
  • F14 Sanding
  • F15 Dispatcher whistle – new
    Call to readiness
  • F16 Dispatcher whistle – old
    Call to readiness, departure
  • F17 Compressor
    Also random sound
  • F18 Air release
  • F19 Wheel squeal in curves
  • F20 Station announcement
    Train Os 5028
  • F21 Station announcement
    Train Os 5016
  • F22 Station announcement
    Train Os 5048
  • F23 Station announcement
    Train Os 5011
  • F24 Unused
  • F25 Unused
  • F26 Mute sounds
  • F27 Volume down
  • F28 Volume up

Setting Maximum Speed

Use CV57 to set the maximum speed. Changing CV5 alters the sound range, while CV57 leaves the CV3/CV4 acceleration and braking times untouched.

Shunting Mode

Marker lights are switched off in shunting mode. Many models wire the marker lights together with the headlight; enable this behaviour with CV37 = 3 if desired.

The mode reduces acceleration and braking times to one quarter of the CV3/CV4 values. Disable this feature with CV124 = 16 or fully cancel the acceleration/braking times with CV124 = 19.

Set CV124 = 0 to disable shunting mode entirely. The default value is CV124 = 18.

A short horn sounds at every start in shunting mode. This script-controlled feature requires F3 enabled, engine sound on via F8, and starting from zero speed. CV837 = 8 disables it (default CV837 = 0).

F5 Coasting vs F6 Engine to Maximum RPM

If both functions are active, coasting takes precedence.

Compressor

The compressor is script-controlled in two ways:

  1. Random activation while the engine sound (F8) is on; enabling F17 cancels the random cycle.
  2. Direct activation via F17 that requires F8 on and zero speed.

CV837 = 1 disables F17, CV837 = 2 disables the random mode, and CV837 = 3 disables both.

Curve Squeal

Curve squeal is script-driven and requires F19 and F8 enabled, plus a speed above 14 and below 100 (range 0–126). Set CV837 = 4 to disable the effect; default CV837 = 0.

Custom Function Mapping

You can customise the function layout via CV400 – CV428. The project itself does not use these CVs.

Decoder Reset

If you make a mistake while configuring the decoder or get lost in the settings, program CV8 = 8 (or CV8 = 0) to restore the project defaults.

Basic CV Settings in Project

  • CV3 = 16
  • CV4 = 14
  • CV5 = 1
  • CV6 = 1
  • CV33 = 1
  • CV34 = 2
  • CV35 = 0
  • CV36 = 0
  • CV37 = 0
  • CV38 = 0
  • CV39 = 0
  • CV40 = 0
  • CV41 = 0
  • CV42 = 0
  • CV43 = 0
  • CV44 = 0
  • CV45 = 0
  • CV46 = 0
  • CV57 = 125
  • CV105 = 145
  • CV106 = 5
  • CV124 = 18
  • CV125 = 88
  • CV126 = 88
  • CV190 = 100
  • CV191 = 50
  • CV254 = 7
  • CV255 = 1
  • CV256 = 1
  • CV266 = 64
  • CV313 = 126
  • CV339 = 6
  • CV340 = 4
  • CV374 = 5
  • CV375 = 0
  • CV395 = 130
  • CV396 = 27
  • CV397 = 28
  • CV836 = 1
  • CV837 = 0

Sound Sample Numbers

F4 CV522 19 Short Horn
F7 CV531 20 Long Horn
F12 CV546 27 Screw Coupler Down
F13 CV549 28 Screw Coupler Up
F14 CV552 29 Sanding
F15 CV555 21 New Dispatcher Whistle
F16 CV558 22 Old Dispatcher Whistle
F18 CV564 30 Air Release
F20 CV540 23 Train Os 5028 Announcement
F21 CV543 24 Train Os 5016 Announcement
F22 CV546 25 Train Os 5048 Announcement
F23 CV549 26 Train Os 5011 Announcement
script 17 Compressor
script 18 Wheel Squeal in Curves

"Script" means that the corresponding sound is used inside a script outside the normal CV mapping. The number is provided for standalone use when the script is disabled.